Single Wall Heat Shrink Tubing
G1 is a non flame retardant polyolefin heat shrinkable tubing with the properties of thin wall, halogen free, glossy surface, good transparency and rapid shrinkage at low temperatures. It is widely used in outer insulation protection of electronics and consumer goods. The clear color makes it high transparency, so the condition of covered objects can be checked clearly.
Powered by Froala Editor
Powered by Froala Editor
FEATURES
• Shrink ratio: 2:1
• Good transparency, flexible
• Low shrink temperature
• Compliance with RoHS
Powered by Froala Editor
Powered by Froala Editor
Powered by Froala Editor
Powered by Froala Editor
Powered by Froala Editor
Powered by Froala Editor
Powered by Froala Editor
Powered by Froala Editor
Powered by Froala Editor
Powered by Froala Editor
Powered by Froala Editor
TYPICAL APPLICATIONS
Material data: Polyolefin
Continuous operating temperature: -55˚C~105˚C
Minimum shrink temperature: 70˚C
Full recovery temperature: Above 100˚C
Standard color: Clear
Powered by Froala Editor
Powered by Froala Editor
Powered by Froala Editor
TECHNICAL DATA
| Property | Specification requirement | Test method | Test result |
| Concentricity | ≥70% | ASTM D2671 | ≥70% |
| Tensile strength | ≥10.3MPa | ASTM D2671 | ≥14.0MPa |
| Elongation at break | ≥200% | ASTM D2671 | ≥400% |
| Dielectric voltage withstand | AC2500V/60S No breakdown | ASTM D2671 | No breakdown |
| Volume resistivity | ≥1014Ω‧cm | ASTM D2671 | ≥1014Ω‧cm |
Powered by Froala Editor
Powered by Froala Editor
Powered by Froala Editor
Powered by Froala Editor
DIMENSIONS
| Part no. | Size (mm) | As supplied(mm) | After unrestricted shrinkage(mm) | Standard length (meter) | ||
| ID.(D) | W.T(W) | ID(Max) (d) | WT(Min) (w) | |||
| G1-0010 | 1.0 | 1.5±0.3 | 0.20±0.05 | 0.7 | 0.33 | 200 |
| G1-0015 | 1.5 | 2.0±0.3 | 0.20±0.05 | 0.8 | 0.34 | 200 |
| G1-0020 | 2.0 | 2.5±0.3 | 0.20±0.05 | 1.1 | 0.34 | 200 |
| G1-0025 | 2.5 | 3.0±0.3 | 0.25±0.05 | 1.25 | 0.42 | 200 |
| G1-0030 | 3.0 | 3.5±0.3 | 0.25±0.05 | 1.5 | 0.42 | 200 |
| G1-0035 | 3.5 | 4.0±0.3 | 0.25±0.05 | 1.75 | 0.42 | 200 |
| G1-0040 | 4.0 | 4.5±0.3 | 0.25±0.05 | 2.0 | 0.42 | 200 |
| G1-0045 | 4.5 | 5.0±0.3 | 0.25±0.05 | 2.25 | 0.42 | 100 |
| G1-0050 | 5.0 | 5.5±0.3 | 0.28±0.05 | 2.5 | 0.52 | 100 |
| G1-0060 | 6.0 | 6.5±0.3 | 0.28±0.05 | 3.0 | 0.52 | 100 |
| G1-0070 | 7.0 | 7.6±0.3 | 0.30±0.07 | 3.5 | 0.56 | 100 |
| G1-0080 | 8.0 | 8.6±0.3 | 0.30±0.07 | 4.0 | 0.56 | 100 |
| G1-0090 | 9.0 | 9.6±0.3 | 0.30±0.07 | 4.5 | 0.56 | 100 |
| G1-0100 | 10.0 | 10.7±0.4 | 0.30±0.07 | 5.0 | 0.56 | 100 |
| G1-0110 | 11.0 | 11.7±0.4 | 0.30±0.07 | 5.5 | 0.56 | 100 |
| G1-0120 | 12.0 | 12.7±0.4 | 0.30±0.07 | 6.0 | 0.56 | 100 |
| G1-0130 | 13.0 | 13.7±0.4 | 0.35±0.08 | 6.5 | 0.69 | 100 |
| G1-0140 | 14.0 | 14.7±0.4 | 0.35±0.08 | 7.0 | 0.69 | 100 |
| G1-0150 | 15.0 | 15.7±0.5 | 0.35±0.08 | 7.5 | 0.69 | 100 |
| G1-0160 | 16.0 | 16.7±0.5 | 0.35±0.08 | 8.0 | 0.69 | 100 |
| G1-0170 | 17.0 | 17.7±0.5 | 0.35±0.08 | 8.5 | 0.69 | 100 |
| G1-0180 | 18.0 | 19.0±0.5 | 0.40±0.10 | 9.0 | 0.77 | 100 |
| G1-0200 | 20.0 | 21.0±0.5 | 0.40±0.10 | 10.0 | 0.77 | 100 |
| G1-0220 | 22.0 | 23.0±0.5 | 0.40±0.10 | 11.0 | 0.77 | 100 |
| G1-0250 | 25.0 | 26.0±1.0 | 0.45±0.10 | 12.5 | 0.87 | 50 |
| G1-0280 | 28.0 | 29.0±1.0 | 0.45±0.10 | 14.0 | 0.87 | 50 |
| G1-0300 | 30.0 | 31.5±1.0 | 0.45±0.10 | 15.0 | 0.87 | 50 |
| G1-0350 | 35.0 | 36.5±1.0 | 0.50±0.10 | 17.5 | 0.97 | 50 |
| G1-0400 | 40.0 | 42.0±1.5 | 0.50±0.10 | 20.0 | 0.97 | 50 |
| G1-0450 | 45.0 | 47.0±1.5 | 0.50±0.10 | 22.5 | 0.97 | 25 |
| G1-0500 | 50.0 | 53.0±2.0 | 0.55±0.10 | 25.0 | 0.97 | 25 |
| G1-0600 | 60.0 | 63.0±3.0 | 0.60±0.15 | 30.0 | 1.17 | 25 |
Powered by Froala Editor
Powered by Froala Editor
Powered by Froala Editor
Powered by Froala Editor
Powered by Froala Editor
Powered by Froala Editor
