Single Wall Heat Shrink Tubing
This specification applies to wire connection, disposal of wire termination, sign of the wire bind, insulate protection of resistance and capacitance, surface protection of sport equipment and the steel frame, rust-proof and corrosion-proof of relative products, wire protection and other.
Powered by Froala Editor
Powered by Froala Editor
Powered by Froala Editor
FEATURES
• Shrink ratio: 2:1
• Longitudinal Shrink Ratio ≤±8%
• Heat resistant polyolefin, it’s higher than general G5 tubes.
• Very flexible, highly flame-retardant (colors only)
• Resistant to common fluids and solvents
• Excellent physical, chemical, and electrical properties
• Meet RoHS
Powered by Froala Editor
Powered by Froala Editor
TYPICAL APPLICATIONS
Material data: Polyolefin
Operating temperature: -55˚C~135˚C
Minimum shrink temperature: 70˚C
Minimum full recovery temperature: 120˚C
Approvals: UL224; AMS-DTL-23053/5 class1
Standard color: Black, white, red, blue, yellow, and green (Other colors, special sizes, and cut pieces are available on request)
Powered by Froala Editor
Powered by Froala Editor
TECHNICAL DATA
| Property | Test method | Test result | |
| Physical | Tensile strength/ MPa | ASTM D638 | ≥10.4 |
| Elongation/ % | ASTM D638 | ≥200 | |
| Tensile strength after aging/ MPa | 175˚C/168hr | ≥7.3 | |
| Elongation after aging/ % | 175˚C/168hr | ≥100 | |
| Heat Shock | 250˚C/4hrs | No viscidity / No cracking | |
| Cold Blend | -55˚C/1hr | No cracking | |
| Electrical | Dielectric withstand | 2500V 1 Min | Without breakdown |
| Dielectric strength/ KV/mm | ASTM D2671 | ≥15 | |
| Volume resistance/ Ω·cm | ASTM D638 | ≥1x1014 | |
| Chemical | Copper stability | UL224;175˚C/168hrs | Pass |
| Anti corrosion | UL224;175˚C/168hrs | Pass | |
| Flammability | ASTM D2671 C | Pass | |
Powered by Froala Editor
Powered by Froala Editor
Powered by Froala Editor
Powered by Froala Editor
Powered by Froala Editor
Powered by Froala Editor
DIMENSIONS
| Part no. | Size(mm) | As supplied | After shrinkage(mm) | Standard lenght (meter) | Application range (mm) | |
| ID(D) | ID(d) | W.T(w) | ||||
| SHT135-2X0010 | 1.0 | ≥1.20 | ≤0.60 | 0.41±0.10 | 200 | 0.75~0.90 |
| SHT135-2X0015 | 1.5 | ≥1.60 | ≤0.80 | 0.41±0.10 | 200 | 0.95~1.50 |
| SHT135-2X0025 | 2.5 | ≥2.40 | ≤1.20 | 0.51±0.10 | 200 | 1.30~2.60 |
| SHT135-2X0030 | 3.0 | ≥3.20 | ≤1.60 | 0.51±0.10 | 200 | 1.80~3.10 |
| SHT135-2X0045 | 4.5 | ≥4.80 | ≤2.40 | 0.51±0.10 | 100 | 2.50~4.00 |
| SHT135-2X0060 | 6.0 | ≥6.40 | ≤3.20 | 0.64±0.10 | 100 | 3.30~6.30 |
| SHT135-2X0090 | 9.0 | ≥9.50 | ≤4.80 | 0.64±0.10 | 100 | 4.90~8.00 |
| SHT135-2X0120 | 12.0 | ≥12.7 | ≤6.40 | 0.64±0.10 | 100 | 6.50~11.0 |
| SHT135-2X0180 | 18.0 | ≥19.1 | ≤9.50 | 0.76±0.15 | 100 | 9.80~17.0 |
| SHT135-2X0250 | 25.0 | ≥25.4 | ≤12.70 | 0.89±0.15 | 50 | 13.0~24.0 |
| SHT135-2X0320 | 32.0 | ≥32.0 | ≤15.90 | 0.89±0.15 | 50 | 17.0~31.0 |
| SHT135-2X0380 | 38.0 | ≥38.0 | ≤19.10 | 1.00±0.15 | 50 | 20.0~37.0 |
| SHT135-2X0500 | 50.0 | ≥51.0 | ≤25.40 | 1.15±0.15 | 25 | 27.0~50.0 |
| SHT135-2X0750 | 75.0 | ≥76.0 | ≤38.10 | 1.27±0.20 | 25 | 40.0~75.0 |
| SHT135-2X1000 | 100.0 | ≥102.0 | ≤50.80 | 1.40±0.20 | 25 | 52.0~100 |
| SHT135-2X1200 | 120.0 | ≥125.0 | ≤63.50 | 1.40±0.25 | 25 | 70.0~110 |
Powered by Froala Editor
Powered by Froala Editor
