High Temperature Heat Shrinkable Tube
Diesel-resistant heat shrinkable tube is made of functional polymer elastomer by radiation cross-linking with excellent, It has excellent resistance to diesel, aviation kerosene resistance, chemical resistance and abrasion resistance, and excellent temperature fluids resistance, long-term heat resistance. Used for military, sky train, marine or commercial cable termination, separation joints and intermediate connections, etc.
Powered by Froala Editor
FEATURES
• Shrink ratio 2:1
• Excellent resistance to oil, diesel and hydraulic fluids chemical resistance
• Flexible, flame retardant
• Compliance with RoHS, REACH
Powered by Froala Editor
Powered by Froala Editor
Powered by Froala Editor
TYPICAL APPLICATIONS
Material data: Polyolefin
Operating temperature: -75℃~150℃
Minimum shrink temperature: 100℃
Minimum fully recovery temperature: 175℃
Standard color: Black
Powered by Froala Editor
Powered by Froala Editor
TECHNICAL DATA
| Property | Unit | Required value | Test result | |
| Shrinking | Longitudinal changes | % | -5 to 5% | -3 to 0% |
| Eccentricity | % | Max. 30% (the size D<38.1 mm) | 15 to 30% | |
| % | Max. 40% (the size D≥38.1 mm) | 20 to 35% | ||
| Physical | Tensile strength | MPa | Min. 13MPa | Min. 15MPa |
| Ultimate elongation | % | Min. 250 % | Min. 500% | |
| Heat aging (160℃ /168 hrs.) Tsnsile strength Ultimate elongation | / MPa % | / Remain 70% Min. 200% | / Min. 9MPa Min. 250% | |
| Heat shock 200℃ / 4 hrs. | / | No cracking, flowing, dropping | No cracking, flowing, dropping | |
| Secant modulus | MPa | Max. 50 | Max. 50 | |
| Electrical | Dielectric strength | kV/mm | Min. 7.9 | Min. 7.9 |
| Volume resistivity | Ω·cm | Min. 109 | 1010 | |
| Chemical | Flammability | / | Self-extinguish in 15s | Pass |
| Fluid resistance Tensile strength Ultimate elengation | / MPa % | / Remain 70% Min. 200% | / Min. 10MPa Min. 200% | |
Powered by Froala Editor
DIMENSIONS
| Part no. | Norminal size | As supplied(mm) | After unrestricted shrinkage(mm) | Standard length (meter) | ||
| inch | mm | ID(D) min | ID(d) max | W.T.(w) | ||
| DR150 | ||||||
| DR150-0016 | 1/16" | 1.6 | 1.6 | 0.8 | 0.51 | 200 |
| DR150-0024 | 3/32" | 2.4 | 2.4 | 1.2 | 0.51 | 200 |
| DR150-0032 | 1/8" | 3.2 | 3.2 | 1.6 | 0.76 | 200 |
| DR150-0048 | 3/16" | 4.8 | 4.8 | 2.4 | 0.85 | 100 |
| DR150-0064 | 1/4" | 6.4 | 6.4 | 3.2 | 0.90 | 50 |
| DR150-0095 | 3/8" | 9.5 | 9.5 | 4.8 | 1.02 | 50 |
| DR150-0127 | 1/2" | 12.7 | 12.7 | 6.4 | 1.22 | 50 |
| DR150-0191 | 3/4" | 19.1 | 13.1 | 9.5 | 1.45 | 50 |
| DR150-0254 | 1" | 25.4 | 25.4 | 12.7 | 1.80 | 30 |
| DR150-0381 | 1-1/2" | 38.1 | 38.1 | 19.1 | 2.40 | 15 |
| DR150-0508 | 2" | 50.8 | 50.8 | 25.4 | 2.80 | 15 |
| DR150-0762 | 3" | 76.2 | 76.2 | 38.1 | 3.20 | 15 |
| DR150(TW) | ||||||
| DR150-0024 | 3/32 | 2.4 | 2.4 | 1.2 | 0.51 | 200 |
| DR150-0032 | 1/8 | 3.2 | 3.2 | 1.6 | 0.51 | 200 |
| DR150-0048 | 3/16 | 4.8 | 4.8 | 2.4 | 0.51 | 100 |
| DR150-0064 | 1/4 | 6.4 | 6.4 | 3.2 | 0.64 | 50 |
| DR150-0095 | 3/8 | 9.5 | 9.5 | 4.8 | 0.64 | 50 |
| DR150-0127 | 1/2 | 12.7 | 12.7 | 6.4 | 0.64 | 50 |
| DR150-0191 | 3/4 | 19.1 | 19.1 | 9.5 | 0.76 | 50 |
| DR150-0254 | 1 | 25.4 | 25.4 | 12.7 | 0.90 | 30 |
| DR150-0381 | 1-1/2 | 38.1 | 98.1 | 19.1 | 1.20 | 15 |
Powered by Froala Editor
