Heat Shrinkable Wire Connectors
Controlled Soldering Devices
Designed for wire connection in different kinds of temperature applications, Where extreme resistance to fuels, water and cleaning solvents is required. One-time realize welding, heat shrinkable protection, sealing.
Powered by Froala Editor
FEATURES
• Shrink ratio: 2:1
• Extreme fluid resistance and rub resistance
• High transparency provides assemblage convenience
Powered by Froala Editor
TYPICAL APPLICATIONS
Material data: PE
Operating temperature: -40˚C~125˚C
Minimum shrinkage temperature:
• 135˚C (for-SSWT-150 Flame resistance type)
• 85˚C (for SSWT-105/125 Non flame resistance type)
Standard color: White, red, blue and yellow
Powered by Froala Editor
TECHNICAL DATA
| Property | Requirements | Testing methods |
| Tensile strength (MPa) | ≥10.3 | ASTM D638 |
| Ultimate elongation (%) | ≥200 | ASTM D638 |
| Specific gravity | 1.1(max) | ASTM D792 |
| Chemical resistance | Good | ASTM D2671 |
| Voltage withstand (V) | 2500V, 60s, Pass | ASTM D149 |
| Dielectric strength (MV/m) | ≥19.7 | ASTM D149 |
| Volume resistivity (Ω-cm) | ≥1014 | IEC 93 |
| Water absorption (%) | ≤1.0 | ASTM D570, 23˚C, 24h |
| Corrosion | Pass | ASTM D2671 |
| Low temperature flexibility | No cracking | Wind to the specified mandrel,1h at-45˚C, ASTM D2671 |
Powered by Froala Editor
DIMENSIONS
| Part no. | Heat shrinkable sleeve | Solder ring | Standard color | |
| I.D(A) (mm) | Length(L) (mm) | Width(mm) | ||
| SSWT-0017 | ≥1.7 | 26.0±0.5 | 2.5±0.1 | White |
| SSWT-0027 | ≥2.7 | 42.0±0.5 | 3.5±0.1 | Red |
| SSWT-0045 | ≥4.5 | 42.0±0.5 | 4.0±0.1 | Blue |
| SSWT-0060 | ≥6.0 | 42.0±0.5 | 4.5±0.1 | Yellow |
| SSWT-0070 | ≥7.0 | 42.0±0.5 | 5.0±0.1 | Blue |
| SSWT-0087 | ≥8.7 | 42.0±0.5 | 5.0±0.1 | Blue |
| SSWT-0107 | ≥10.7 | 42.0±0.5 | 5.5±0.1 | Blue |
| SSWT-0130 | ≥13.0 | 42.0±0.5 | 6.0±0.1 | Blue |
Powered by Froala Editor
Powered by Froala Editor
RELATED PRODUCTS
Get in Touch
