Single Wall Heat Shrink Tubing
G5 is a polyolefin material heat shrinkable tubing that complies with current environmental regulations. It is widely used in industrial and commercial fields, such as outer insulation protection of wire splices, metal pipes, electronic components, and so on.
Powered by Froala Editor
FEATURES
• Shrink ratio: 2:1
• Very flexible, high flame retardant
• Resistant to common solvent liquid
• Excellent physical, chemical and electrical performance
• Compliance with RoHS
Powered by Froala Editor
Powered by Froala Editor
Powered by Froala Editor
TYPICAL APPLICATIONS
Material data: Polyolefin
Continuous operating temperature: -55˚C~125˚C
Minimum shrink temperature: 70˚C
Full recovery temperature: Above 110˚C
Approvals: UL224 File no.E255532,125˚C VW-1 600V
Standard color: Black, white, red, blue, yellow, and green (Other colors, special sizes, and cut pieces are available on request)
Powered by Froala Editor
TECHNICAL DATA
| Property | Specification requirement | Test method | Test result |
| Longitudinal change | -10%~10% | ASTM D2671 | Pass |
| Tensile strength | ≥10.3MPa | ASTM D2671 | ≥11.3MPa |
| Elongation at break | ≥200% | ASTM D2671 | ≥400% |
| Tensile strength after aging | 70% of initial value | ASTM D2671 (158˚C/168 hrs) | ≥80% |
| Elongation at break after aging | ≥100% | ASTM D2671 (158˚C/168 hrs) | ≥200% |
| Heat shock | No cracking | ASTM D2671 (200˚C/4 hrs) | No cracking |
| Low temperature flexibility | No cracking | ASTM D2671 (-30˚C/1 hr) | No cracking |
| Dielectric voltage withstand | AC2500V/60S No breakdown | ASTM D2671 | No breakdown |
| Volume resistivity | ≥1014Ω‧cm | ASTM D2671 | ≥1014Ω‧cm |
| Dielectric strength | ≥19.7kV/mm | ASTM D2671 | 22 kV/mm |
| Flammability | VW-1 | UL224 | Pass |
Powered by Froala Editor
Powered by Froala Editor
Powered by Froala Editor
Powered by Froala Editor
Powered by Froala Editor
Powered by Froala Editor
Powered by Froala Editor
Powered by Froala Editor
Powered by Froala Editor
DIMENSIONS
| Part no. | Size (mm) | As supplied(mm) | After unrestricted shrinkage(mm) | Standard length (meter) | ||
| ID.(D) | W.T(W) | ID(Max) (d) | WT(Min) (w) | |||
| G5-0008 | 0.8 | 1.0±0.2 | 0.15±0.05 | 0.6 | 0.25 | 200 |
| G5-0010 | 1.0 | 1.5±0.3 | 0.20±0.05 | 0.7 | 0.33 | 200 |
| G5-0015 | 1.5 | 2.0±0.3 | 0.20±0.05 | 0.8 | 0.34 | 200 |
| G5-0020 | 2.0 | 2.5±0.3 | 0.20±0.05 | 1.1 | 0.34 | 200 |
| G5-0025 | 2.5 | 3.0±0.3 | 0.25±0.05 | 1.25 | 0.42 | 200 |
| G5-0030 | 3.0 | 4.5±0.3 | 0.25±0.05 | 1.5 | 0.42 | 200 |
| G5-0035 | 3.5 | 4.0±0.3 | 0.25±0.05 | 1.75 | 0.42 | 200 |
| G5-0040 | 4.0 | 4.5±0.3 | 0.25±0.05 | 2.0 | 0.42 | 200 |
| G5-0045 | 4.5 | 5.0±0.3 | 0.25±0.05 | 2.25 | 0.42 | 100 |
| G5-0050 | 5.0 | 5.5±0.3 | 0.28±0.05 | 2.5 | 0.52 | 100 |
| G5-0060 | 6.0 | 6.5±0.3 | 0.28±0.05 | 3.0 | 0.52 | 100 |
| G5-0070 | 7.0 | 7.6±0.3 | 0.30±0.07 | 3.5 | 0.56 | 100 |
| G5-0080 | 8.0 | 8.6±0.3 | 0.30±0.07 | 4.0 | 0.56 | 100 |
| G5-0090 | 9.0 | 9.6±0.3 | 0.30±0.07 | 4.5 | 0.56 | 100 |
| G5-0100 | 10.0 | 10.7±0.4 | 0.30±0.07 | 5.0 | 0.56 | 100 |
| G5-0110 | 11.0 | 11.7±0.4 | 0.30±0.07 | 5.5 | 0.56 | 100 |
| G5-0120 | 12.0 | 12.7±0.4 | 0.30±0.07 | 6.0 | 0.56 | 100 |
| G5-0130 | 13.0 | 13.7±0.4 | 0.35±0.08 | 6.5 | 0.69 | 100 |
| G5-0140 | 14.0 | 14.7±0.4 | 0.35±0.08 | 7.0 | 0.69 | 100 |
| G5-0150 | 15.0 | 15.7±0.5 | 0.35±0.08 | 7.5 | 0.69 | 100 |
| G5-0160 | 16.0 | 16.7±0.5 | 0.35±0.08 | 8.0 | 0.69 | 100 |
| G5-0170 | 17.0 | 17.7±0.5 | 0.35±0.08 | 8.5 | 0.69 | 100 |
| G5-0180 | 18.0 | 19.0±0.5 | 0.40±0.10 | 9.0 | 0.77 | 100 |
| G5-0200 | 20.0 | 21.0±0.5 | 0.40±0.10 | 10.0 | 0.77 | 100 |
| G5-0220 | 22.0 | 23.0±0.5 | 0.40±0.10 | 11.0 | 0.77 | 100 |
| G5-0250 | 25.0 | 26.0±1.0 | 0.45±0.10 | 12.5 | 0.87 | 50 |
| G5-0280 | 28.0 | 29.0±1.0 | 0.45±0.10 | 14.0 | 0.87 | 50 |
| G5-0300 | 30.0 | 31.5±1.0 | 0.45±0.10 | 15.0 | 0.87 | 50 |
| G5-0350 | 35.0 | 36.5±1.0 | 0.50±0.10 | 17.5 | 0.97 | 50 |
| G5-0400 | 40.0 | 42.0±1.5 | 0.50±0.10 | 20.0 | 0.97 | 50 |
| G5-0450 | 45.0 | 47.0±1.5 | 0.50±0.10 | 22.5 | 0.97 | 25 |
| G5-0500 | 50.0 | 53.0±2.0 | 0.55±0.10 | 25.0 | 0.97 | 25 |
| G5-0600 | 60.0 | 63.0±3.0 | 0.60±0.15 | 30.0 | 1.17 | 25 |
| G5-0700 | 70.0 | 71.0±3.0 | 0.60±0.15 | 35.0 | 1.17 | 25 |
| G5-0800 | 80.0 | 81.0±3.0 | 0.65±0.15 | 40.0 | 1.20 | 25 |
| G5-0900 | 90.0 | 91.0±3.0 | 0.75±0.15 | 45.0 | 1.30 | 25 |
| G5-1000 | 100 | 101.0±3.0 | 0.75±0.15 | 50.0 | 1.30 | 25 |
| G5-1200 | 120 | 121.0±4.0 | 0.80±0.20 | 60.0 | 1.40 | 15 |
| G5-1500 | 150 | 151.0±4.0 | 0.80±0.20 | 75.0 | 1.50 | 15 |
| G5-1800 | 180 | 181.0±4.0 | 0.80±0.20 | 90.0 | 1.60 | 15 |
Powered by Froala Editor
Powered by Froala Editor
Powered by Froala Editor
Powered by Froala Editor
Powered by Froala Editor
Powered by Froala Editor
Powered by Froala Editor
Powered by Froala Editor
Powered by Froala Editor
