Single Wall Heat Shrink Tubing
This specification applies to wire connection, disposal of wire termination, sign of the wire bind, insulate protection of resistance and capacitance, surface protection of sport equipment and the steel frame, rust-proof and corrosion-proof of relative products, wire protection and other application of 3:1 Halogen Free Flame-retardant heat shrinkable tube.
Powered by Froala Editor
FEATURES
• Shrink ratio: 3:1
• Can be used in acid, alkali conditions.
• Flame retardant
• Resistant to common fluids and solvents
• Excellent physical, chemical, and electrical properties
Powered by Froala Editor
TYPICAL APPLICATIONS
Material data: Polyolefin
Operating temperature: -55˚C~125˚C
Minimum shrink temperature: 70˚C
Full recovery temperature: Above 125˚C
Standard color: Black (Other colors, special sizes, and cut pieces are available on request)
Powered by Froala Editor
Powered by Froala Editor
TECHNICAL DATA
| Property | Test method | Test result |
| Tensile strength (MPa) | ASTM D2671 | ≥10.4 |
| Ultimate elongation (%) | ASTM D2671 | ≥200 |
| Tensile strength after heat aged (MPa) | 158 ℃ x 168h | ≥7.3 |
| Ultimate elongation after heat aged (%) | 158 ℃ x 168h | ≥100 |
| Longitudinal change (%) | ASTM D 2671 | -5% ~ +5% |
| Flammability | ASTM D 2671 C method | VW-1 |
| Voltage withstand | UL 224, 2500V, 60s | No breakdown |
| Dielectric strength (KV/mm) | ASTM D 149 | ≥15 |
| Volume resistivity ( Ω .cm) | ASTM D 876 | ≥1014 |
Powered by Froala Editor
DIMENSIONS
| Part no. | Size(mm) | As supplied(mm) | After shrinkage(mm) | Standard package | ||
| Inch | mm | Internal diameter(D) | Internal diameter(d) | Wall thickness(w) | m/spool | |
| SLT125-3X-0015 | 1/16 | 1.5 | 1.6±0.1 | ≤0.5 | 0.45±0.10 | 200 |
| SLT125-3X-0030 | 1/8 | 3.0 | 3.2±0.1 | ≤1.0 | 0.55±0.10 | 200 |
| SLT125-3X-0045 | 3/16 | 4.5 | 4.7±0.1 | ≤1.5 | 0.60±0.10 | 200 |
| SLT125-3X-0060 | 1/4 | 6.0 | 6.2±0.1 | ≤2.0 | 0.65±0.10 | 100 |
| SLT125-3X-0090 | 3/8 | 9.0 | 9.3±0.2 | ≤3.0 | 0.75±0.15 | 100 |
| SLT125-3X-0120 | 1/2 | 12.0 | 12.3±0.2 | ≤4.0 | 0.75±0.15 | 100 |
| SLT125-3X-0150 | 5/8 | 15.0 | 15.3±0.2 | ≤5.0 | 0.80±0.15 | 100 |
| SLT125-3X-0180 | 3/4 | 18.0 | 18.3±0.2 | ≤6.0 | 0.85±0.15 | 100 |
| SLT125-3X-0240 | 1 | 24.0 | 24.4±0.3 | ≤8.0 | 1.00±0.20 | 50 |
| SLT125-3X-0300 | 1-1/4 | 30.0 | 30.4±0.3 | ≤10.0 | 1.15±0.20 | 50 |
| SLT125-3X-0390 | 1-1/2 | 39.0 | 39.6±0.5 | ≤13.0 | 1.50±0.20 | 50 |
| SLT125-3X-0500 | 2 | 50.0 | 50.6±0.5 | ≤16.0 | 2.50±0.20 | 25 |
| SLT125-3X-0600 | 60.0 | 61.5±1.0 | ≤20.0 | 2.60±0.20 | 25 | |
| SLT125-3X-0700 | 70.0 | 61.5±1.0 | ≤23.0 | 2.60±0.20 | 25 | |
| SLT125-3X-0800 | 3 | 80.0 | 71.5±1.0 | ≤26.0 | 2.60±0.20 | 25 |
| SLT125-3X-0900 | 90.0 | 81.5±1.0 | ≤30.0 | 2.60±0.20 | 25 | |
| SLT125-3X-1000 | 4 | 110.0 | 91.5±1.0 | ≤33.0 | 2.60±0.20 | 25 |
Powered by Froala Editor
